ZTE network equipment: setting up routers for Rostelecom. Detailed instructions for correctly setting up a ZTE router Login to the Rostelecom zte router

A router is a network equipment that allows multiple devices to simultaneously access the Internet (computers, tablets, smartphones and much more).

Today's range of routers allows you to choose exactly what is most suitable for a particular case.

Review of routers

There are several models that are optimal for use at home:
Zte E5501;
Zte H118N;
Zte E5502;

Zte ZXA10 f660.

ZTE E5501

This device supports many interfaces:
4 ports for an RJ-45 connector (which allows you to work with data via a network interface, the cable type is determined automatically);
operates according to the 802.11n communication standard (2.4 GHz frequency);

There are two non-removable antennas that ensure stable Wi-Fi operation. In addition to the supported interfaces this device

has many other options that make its use quite convenient and simple.

Zte H118N

A router of this type in its design has:
USBv.2 in the amount of 1 piece for connecting a 3G modem (optional);
4 ports for connecting a cable crimped with an RJ-45 connector;

Wi-Fi (IEEE 802.11n).

The maximum data transfer rate of this device is 300 Mbit/s. Several data encryption technologies are also supported - WEP, WPA, WPA2.

ZTE 5502

The router in question from such a renowned company is in no way inferior to its classmates:
4 ports for cable connection via RG-45 connector;
supported: IEEE 802.11n (maximum transmission speed – 300 Mbit/s);

there are two antennas for operation in the 2.4 GHz band;

The encryption capabilities of the device in question are the widest:
WEP with 64/128 bit encryption technology;
WPA-PSK;

WPA2-Interprise and many others.

ZteZXA 10 F660

The ZTE router not only has excellent performance characteristics, but also a relatively low price.

It is easy to set up and also supports all the necessary technologies:
there are 4 connectors for RG-45;
2 connectors for working with the POTS interface (RG-11);
works successfully with Wi-Fi technology;

There is a connector for connecting USB devices.

Selecting a device

When choosing a router for your home, you need to consider the following important points:
price - this issue is especially relevant for those families with many children;
reliability;
features of the Wi-Fi module.

How simpler design device, the easier it is to configure it. That is why you should give your preference to those routers that do not require dancing with tambourines while connecting and getting started. This will save you money a large number of time.

Video: How to open a port on the ZTE ZXA10 F660 router

Price range is very important point . Today there is no point in purchasing expensive devices. Since even the youngest models in the line have on board everything that is required for comfortable work with a Wi-Fi network at home. You shouldn’t overpay for a model’s brand – usually such expenses are completely unjustified.

When choosing the best price option, you should not purchase very cheap models. Since often the extremely low price is not the most high quality manufacturing, which may lead to failure in the near future.

The Wi-Fi module must have an antenna located outside the case. Since antennas of this type cover a large area. Which is very important if the apartment or house has a large area. Also, the antenna should be removed and replaced if necessary, as it may be necessary to expand the coverage area.

The optimal choice in all respects is the ZTE ZXA10 F660 router. It has many advantages, as well as a fairly low price (considering its pretty good parameters).

PC connection

The easiest part of setting up a ZTE router is connecting it to a PC. This operation is performed in the following order:

Manage Settings

How to set up a ZTE Wi-Fi router? Settings are managed using a WEB interface, which can be accessed through any browser installed on a PC. For example, internet explore. In the address line you should enter the following combination of numbers and symbols - http://192.168.1.1. If the router is connected to the computer according to the instructions, a window will appear in which you can enter your login and password.

The default password and login is the word admin (in Latin letters only). When the fields are filled in, click the “Login” button. Next, a window will appear, made in green and white colors.

At the top there are the following tabs:

status;
network;
security;
application;
administration.

Each tab allows you to manage one or another section.

For Wi-Fi settings you should do the following:

Using this list of actions, Wi-Fi is turned on.

Special attention should be paid to the section called “Multi-SSID”.

If desired, this section allows you to make the network both open and closed for various types of devices:

SSIDName – this item allows you to name the configured network by any name;
MaximumClients – the maximum possible number of simultaneously connected devices ( this model supports 32 pcs);
EnableSSID – enable or disable the network being changed;
HideSSID – hiding a wireless network;
ChooseSSID – select a changeable Wi-Fi network.

Photo: Setting up wifi on a Promsvyaz modem

There is also a Security section where you can configure the following items:

When choosing a password, it is advisable to follow the following recommendations:

the presence of lowercase and uppercase letters (in random order);
The password must be at least 10 characters long;
The presence of numbers is also desirable.

Setting up a ZTE router for providers

The ZTE ZXA10 F660 router is configured differently, depending on which Internet service provider is (MGTS, Rostelecom, Ukrtelecom).

Ukrtelecom

Setting up work with this operator requires special care, since all the nuances should be taken into account:

In the “Multi-SSIDSettings” and “Security” sections, all settings are set according to the instructions supplied with the device.

Particular attention should be paid to the “AccessControlList” section. The “Mode” item should be set to “Block”. "MACAddress" - 00:13:e0:81:97:ee.

Rostelecom

Setting up a router to work with the Rostelecom provider is not difficult.

You need to do the following:

When the above steps are completed, you should configure the “Multi-SSIDSettings” section:

in the “ChooseSSID” item set the SSID value;
check the box next to “EnableSSID”;
"SSIDName" allows you to select a network name.

After completing all settings, you must click the “Submit” button.

MGTS

To correctly configure the router model in question with the “MGTS” driver, you must perform the following steps in strict order:

This will enable Wi-Fi. The remaining settings are made in accordance with the manual supplied with the router.

It is also imperative to configure a section called Multi-SSID. This section allows you to set a personal identifier for the network, and also, if desired, hide it. All settings are made individually, depending on the personal preferences of the user.

The section called “Securiry” allows you to configure encryption settings and a password for connecting to the network.

The ZTEZxa10 F660 router is the optimal device in terms of price-quality ratio. An excellent choice for home and office. This network equipment is easy to configure, compact, and reliable.

Rostelecom

Each of us from time to time is faced with the need for a router option, using which we connect to the Internet. Here, if you are the owner of a router from Rostelecom, your company will need the information below under any circumstances.

Our client is left with what exactly will be useful for you - a router, a laptop or a computer with Wi-Fi function and a little extra time. First of all, you need to open a successful Internet browser and in the search bar enter the address of the router, which you will find on a sticker on or the top panel of the device.

It consists of numbers and dots: for example,

192.168.1.1

When you enter the correct number, expect an authorization window where you will be asked to enter your personal data as a Rostelecom subscriber. After this, wait for the necessary settings to appear.

Tune

router

via Wi-Fi module

If your router does not connect to your computer via a patch cord, then you need to spend time on the equipment's ability to work with the Wi-Fi function. Just turn on the router and go to Network Center to make sure it's active wireless connection Internet.

Read also

How to determine under which operator the iPhone is locked by IMEI While buying an iPhone abroad, for its subsequent unlocking, it is extremely important to discover under which operator it is locked in order to assess how difficult the process will be...

How to remove the screen lock on a Samsung phone? Screen lock is a reliable method of protection Android devices from strangers. In many Samsung phones, this tool is pre-installed, so anyone can use it. If the numbers...

The popularity of tablets in Russia is growing not year after year, but almost day by day. More and more new devices are appearing in both the premium and economy sectors, and the latter are not far behind the expensive models in terms of performance. They use pl...

How to disable screen lock on AndroidLock screen is a great way to protect Android smartphone from unauthorized persons, not accidental clicks, which can provoke leakage of personal information or other unwanted calls. However, with blocks...

Disassembly Lenovo laptop Ideapad B590. Cleaning the laptop from dust and replacing thermal paste. Main page » Disassembling the Lenovo Ideapad B590 laptop. Cleaning the laptop from dust and replacing thermal paste. Disassembling the Lenovo Ideapad B590 laptop. Cleaning laptop...

It's almost 2020 and Android phones I NEVER have the ability to record more than 4GB of footage with 4K 60fps motion. The camera app doesn't stop recording completely, despite this. Your post will just be split into...

To activate the connection, you must set up Wi-Fi and enter its password. When setting up the modem for the first time, a password has not yet been created, but you can create it in the router settings menu. Incorrect password It could happen that

router

Setting up a ZTE modem

ZXHN H208N

Setup of the ZTE ZXHN

H208N modem

Setting up the modem ZTE ZXHN H208N router, WiFi setup, IPTV Setup of the ZTE ZXHN H208N modem in a router, the .

Setting up a wi-fi router zte zxhn h108n, internet, wi-fi, interactive TV, multiroom

Detailed description of DSL wi-fi ZTE router zxhn h108n, setup by a wizard and manually Internet, interactive TV, wi-fi.

In this case, you should reset the current settings to factory defaults: to do this, press the reset configuration button deeply hidden in the router. Hold the button for a couple of seconds until all the buttons on the router light up.

Read also

HTC Sync and HTC Sync Manager HTC Sync Manager allows you to sync your HTC devices with your computers. Our client is supported by the latest HTC smartphones series One, Desire, Butterfly and other models.HTC Sync Manager provides synchronization...

Why classmates are not opening Here are a few reasons why classmates and contacts are not enabled, and what to do if you see on your page in in social networks what's yours Account blocked or something like that. What if you are completely...

Changing the matrix, screen, LCD (LED, 3D) LG TV There is no need to be surprised if your LCD (LED, 3D) LG TV fails, our client remains that there is, that our client remains LCD TVs are very sensitive to any, even the most the smallest mechanic...

iPhone users often come up with the question of how to put a melody on iPhone call. After all, everyone wants to set a ringtone on their iPhone so that it pleases their ears. Setting music for a call is not particularly difficult if...

You, Huawei's P20 Pro is almost a year old, however This phone still remains one of best phones in the manufacturing department. The Pro arrives flaunting a 6.1-inch AMOLED display, a smart triple rear camera setup, and a fast Kirin processor. Although...

Cash. quite an old instrument. He became part operating system in the earliest Windows versions. Cache. is a system repository that allows you to store the information you need for a while random access memory. This tool allows...

Now wait for the device to completely reboot. Next, you can enter the username and password indicated below. If everything went correctly, the browser window should display

settings menu

devices. If this does not help, you should think about a faulty router. The first step is to seek help from qualified specialists.

Classification of settings

settings menu

device, you have the opportunity to change the router parameters at your discretion. They come in the following types:

Settings for creating and changing passwords and names;
Setting a Wi-Fi password;
Configuration of the router with the Rostelecom server;
Regulating the operation of connected equipment;
Blocking the ability to connect inappropriate devices;
Changing the equipment hierarchy

When you cannot enter the settings of your router on your own, you should turn to more experienced Rostelecom specialists for help. To do this, you can use the operator’s contact number or the feedback form on the company’s official website.

Post Views: 10

ZTE F660 is a router that uses GPON technology to connect to the Internet. In addition to the standard functions of distributing the Internet to devices connected to the router via cable or Wi-Fi, the ZTE router is capable of providing its owners with IP telephony and provides the opportunity to create local WEB servers.

What distinguishes the ZTE F660 from other routers purchased for home use is the presence of advanced xPON communication technologies. Another important feature of the router is that the device is multifunctional. In addition to the standard four PJ-45 ports and the ability to connect clients via Wi-Fi, the device has the ability to connect electronic USB media standard 2.0 and devices according to .

Device characteristics and features

Operating frequency – 2.4 GHz
Data transfer via Wi-Fi operates at a speed of 300 Mbps
Implemented technical support for 4 SSIDs with simultaneous connection of 128 users to each network
Supports WPS mode to increase Wi-Fi coverage of other switches.

On the back of the router are located:

WLAN and WPS function control buttons
One port for connecting USB devices
POTS connectors (2 pcs.)
LAN ports (4 pcs.)
To reset the ONT ZTE ZXHN F660 optical modem settings to factory settings, there is a RESET button on the back side, located in the recess of the case.
Connector for the power supply from the device's network.
Button to turn on and off

How to connect a router

After installing and turning on the router, you need to configure this equipment for full use.

Connect the fiber optic cable to the outlet and to the router socket.
Connect the LAN cable to network card computer or laptop. Connect the second end of the cable to any LAN connector of the router router.
Check that the LAN activity indicator is lit.

After setting up a wired connection, you need to configure access via Wi-Fi.

Step-by-step setup of the MGTS GPON ZTE F660 router

In the address bar of the browser, type the IP address “http://192.168.0.1
On the router settings page, enter: login – “admin”, password – “admin”.
If the services for providing a router are provided by the MGTS provider, try entering “mgts” in the login line and “mtsoao” in the password line.
After identification, in the window that opens you will be able to see specifications router: model, serial number, firmware version, device chip version, and router password.
To connect wireless access via Wi-Fi, you need to go to the “Network” tab located at the top. Next, open the “WLAN” submenu on the left side of the window and find the “Basic” subsection.
In the first column “Wireless RF Mode” set the value “Enabled”
In the “mode” line, select “Mixed (802.11b)”
Region – Russia
Line "Chanel" - mode "Auto".
In “Transmitting power” select “100%”.
Click the button to save the entered settings - “Submit”.
Next, open the “Multi-SSID Settings” submenu (Fig. 3)
In the “SSID Name” line, you need to come up with and enter the name of the network, then click the “Submit” button.
Open the “Security” submenu and insert the following values:
Enter the previously created password in the “WPA Passphrase” line, which will be the network key. To ensure network security and avoid unauthorized access, the password must contain at least 8-10 characters of the Latin alphabet, it is advisable to use both upper and lower case characters, as well as numbers.
To save, click on the “Submit” button.

If all specified actions done correctly, and the device is in working condition, you can connect various devices to Wi-Fi access.

If you decide to reset your router to factory settings, you need to perform a custom reset as follows:

When the router is turned on, you must hold down the reset button for 30 seconds
While continuing to hold the button, turn off the power, and hold the button for another 30 seconds.
Connect the device to the network again and hold the button down for another 30 seconds.

If everything is done correctly, the router should return to factory settings.

How to download and install firmware on a router

If errors appear on the router, for example, during regular Wi-Fi shutdowns, for no apparent reason, the router can be reflashed. But this is done at your own peril and risk, since this will void the factory warranty. By MGTS agreement The router belongs to the provider company, not the user. And in case of unsuccessful firmware, the user will have to pay the cost of the router.

In order to flash the router, you need to download official version from the website of the equipment manufacturer ZTE, or contact

A router is a network equipment that allows multiple devices to simultaneously access the Internet (computers, tablets, smartphones and much more).

Today's range of routers allows you to choose exactly what is most suitable for a particular case.

Review of routers

There are several models that are optimal for use at home:
Zte E5501;
Zte H118N;
Zte E5502;

Zte ZXA10 f660.

ZTE E5501

This device supports many interfaces:
4 ports for an RJ-45 connector (which allows you to work with data via a network interface, the cable type is determined automatically);
operates according to the 802.11n communication standard (2.4 GHz frequency);

Today's range of routers allows you to choose exactly what is most suitable for a particular case.

has many other options that make its use quite convenient and simple.

Zte H118N

A router of this type in its design has:
USBv.2 in the amount of 1 piece for connecting a 3G modem (optional);
4 ports for connecting a cable crimped with an RJ-45 connector;

Wi-Fi (IEEE 802.11n).

The maximum data transfer rate of this device is 300 Mbit/s. Several data encryption technologies are also supported - WEP, WPA, WPA2.

ZTE 5502

The router in question from such a renowned company is in no way inferior to its classmates:
4 ports for cable connection via RG-45 connector;
supported: IEEE 802.11n (maximum transmission speed – 300 Mbit/s);

there are two antennas for operation in the 2.4 GHz band;

The encryption capabilities of the device in question are the widest:
WEP with 64/128 bit encryption technology;
WPA-PSK;

WPA2-Interprise and many others.

ZteZXA 10 F660

The ZTE router not only has excellent performance characteristics, but also a relatively low price.

It is easy to set up and also supports all the necessary technologies:
there are 4 connectors for RG-45;
2 connectors for working with the POTS interface (RG-11);
works successfully with Wi-Fi technology;

There is a connector for connecting USB devices.

Selecting a device

When choosing a router for your home, you need to consider the following important points:
price - this issue is especially relevant for those families with many children;
reliability;
features of the Wi-Fi module.

In addition to the supported interfaces, this device has many other options that make its use quite convenient and simple. The simpler the design of the device, the easier it is to configure.

Video: How to open a port on the ZTE ZXA10 F660 router

That is why you should give your preference to those routers that do not require dancing with tambourines while connecting and getting started. This will save a lot of time.. Today there is no point in purchasing expensive devices. Since even the youngest models in the line have on board everything that is required for comfortable work with a Wi-Fi network at home. You shouldn’t overpay for a model’s brand – usually such expenses are completely unjustified.

Price range is a very important point

When choosing the best price option, you should not purchase very cheap models. Since often the extremely low price does not mean the highest quality of workmanship, which can soon lead to breakdown. It has many advantages, as well as a fairly low price (considering its pretty good parameters).

PC connection

The easiest part of setting up a ZTE router is connecting it to a PC. This operation is performed in the following order:

Manage Settings

The default password and login is the word admin (in Latin letters only). When the fields are filled in, click the “Login” button. Next, a window will appear, made in green and white colors.

At the top there are the following tabs:

status;
network;
security;
application;
administration.

Each tab allows you to manage one or another section.

The optimal choice in all respects is the ZTE ZXA10 F660 router.

Using this list of actions, Wi-Fi is turned on.

Special attention should be paid to the section called “Multi-SSID”.

If desired, this section allows you to make the network both open and closed for various types of devices:

SSIDName – this item allows you to name the configured network by any name;
To set up Wi-Fi, follow these steps:
EnableSSID – enable or disable the network being changed;
HideSSID – hiding a wireless network;
ChooseSSID – select a changeable Wi-Fi network.

There is also a Security section where you can configure the following items:

When choosing a password, it is advisable to follow the following recommendations:

the presence of lowercase and uppercase letters (in random order);
The password must be at least 10 characters long;
The presence of numbers is also desirable.

Setting up a ZTE router for providers

The ZTE ZXA10 F660 router is configured differently, depending on which Internet service provider is (MGTS, Rostelecom, Ukrtelecom).

Ukrtelecom

Setting up work with this operator requires special care, since all the nuances should be taken into account:

MaximumClients – the maximum possible number of simultaneously connected devices (this model supports 32);
in the “Network” section you need to open the “WLAN” column;
the “Mode” item allows you to select the operating mode – “Mixed”;
selecting a region - “Country”;
“BandWidth” - operating range (40 MHz);
“Chanel” - channel, you need to set the mode to “Auto”;
The “Submit” button allows you to complete the configuration and save it.

In the “Multi-SSIDSettings” and “Security” sections, all settings are set according to the instructions supplied with the device.

Particular attention should be paid to the “AccessControlList” section. The “Mode” item should be set to “Block”. "MACAddress" - 00:13:e0:81:97:ee.

Rostelecom

Setting up a router to work with the Rostelecom provider is not difficult.

You need to do the following:

When the above steps are completed, you should configure the “Multi-SSIDSettings” section:

in the “ChooseSSID” item set the SSID value;
check the box next to “EnableSSID”;
"SSIDName" allows you to select a network name.

After completing all settings, you must click the “Submit” button.

MGTS

To correctly configure the router model in question with the “MGTS” driver, you must perform the following steps in strict order:

This will enable Wi-Fi. The remaining settings are made in accordance with the manual supplied with the router.

The section called “Securiry” allows you to configure encryption settings and a password for connecting to the network.

The ZTEZxa10 F660 router is the optimal device in terms of price-quality ratio. An excellent choice for home and office. This network equipment is easy to configure, compact, and reliable.

Question: How to set up Internet on ZTE smartphones (phones) and tablets?

Answer: Setting up the Internet on ZTE devices is performed in the following order.

1. We connect the service to the operator. This can usually be done via USSD request.

To connect to the Internet from Megafon, we recommend following the link - http://www.megafon.ru/internet/, select the type of device to connect, for example - “For smartphone”, select your region, then select a tariff, click “Buy”, then When information appears, what code you need to dial to activate the service, for example - *236*0#. We dial this code like a regular telephone number.

To connect to the Internet from MTS, we recommend following the link - http://www.mts.ru/mobil_inet_and_tv/, select the type of device to connect, for example - “Internet from phone”, after which a page will open with a code that you need to dial to connect services, for example - *252#.

To connect to the Internet from Beeline, we recommend following the link - http://beeline.ru/customers/products/mobile/, select the type of device to connect, for example - “On phone”, then select tariff plan, then click on “To connect” -> “Connect and manage the service”, after which you can see information on how to connect the service, for example, by dialing the code - *115*04# or by calling the number.

Attention! Page addresses and USSD request codes are provided for illustrative purposes only and may change over time! To connect, go to the main page of your website mobile operator and already with home page go to pages with information about Internet connection. For other operators, the settings will be approximately similar. You can also call your mobile operator at hotline and activate the service verbally. Another option is to go to any operator’s sales office in your city, where the sales people will be required to connect you to the service.

2. To turn on the Internet, you need to go to “Settings” -> “Data transfer” and opposite the “Mobile” item. traffic" or check the enable box, or move the switch to the right to "On". For most ZTE smartphones, this is enough to automatically turn on the mobile Internet. After the connection is established, depending on the type of connection, the symbol H (HSDPA), G (GPRS), E (Edge), R (Roaming) or 3G will appear in the notification panel next to the network signal strength icon. Also, to check the Internet connection, open the browser and wait for any Internet page to load, for example by typing “ya.ru” (a light version of Yandex) in the address bar.

Attention! If ZTE smartphone 2 SIM card, then the SIM card that will be used to access the Internet must be inserted into the WCDMA/GSM connector, and in the settings “Settings” -> “More” -> “ Mobile network» -> « Network settings SIM1″ (or 2 depending on the model, see the slot number under the cover) -> “Network mode” -> “Preferred network mode” -> “GSM / WCDMA” or only “WCDMA”.

3. If the Internet on your ZTE device still does not appear after following the previous recommendations, then you must either obtain Internet settings from your cellular operator in automatic mode, or enter the settings manually.

Automatic setup

If the operator is Megafon, then go to the website - megafon.ru, click on the link "Support" -> "Settings", there select "ZTE", and then your smartphone model, for example - "V880E" and enter your phone number. After this, the settings should arrive on your device.

If the operator is MTS, then go to the website mts.ru, then “ Mobile Internet and TV" -> "Help and service" -> "Settings" -> "Phone settings". There we enter the number and wait to receive the settings.

If the operator is Beeline, then automatic setting mobile Internet can be ordered by a free call to number 0880. (The password for saving settings is 1234.)

Manual setting

If the operator is Megafon, then go to the address http://labs.megafon.ru/dev/, there we select “Other manufacturers” -> “ZTE”, look for your device, for example “ ZTE Nubia Z5″, well, we’re trying to configure it as it’s written there.

If the operator is Beeline, then go to the website beeline.ru, there click on the link “Help and support” -> “Internet setup” in the search field enter the model of your device, for example - ZTE V790 and then click “Find instructions” and read the information on at a construction site. You can also send instructions directly to your phone by selecting the “Send SMS with instructions for ZTE V790” link.

If the operator is MTS, then go to the website mts.ru, then “Mobile Internet and TV” -> “Help and Maintenance” -> “Settings” -> “Phone Settings” -> “Internet” -> “Android”, read the instructions .

General rules for manual configuration

Go to the “Settings” -> “More” -> “Mobile network” section. If 2 SIM cards are used, then select the settings of the SIM card for which the Internet is activated. Next, click on the item “APN access points” -> “New access point” and enter the settings that are indicated on the website of your cellular operator. After entering the settings, save the access point, reboot the device and rejoice.

In most cases, it is enough to set the following settings.